Sensor Node Development Kit
TAIYO YUDEN's 2.4GHz (802.15.1) "BLE Evaluation Kit/Board", "Sensor Node Development Kit", "3 types of firmware" and various sensors can be combined to realize a "start small" for IoT.
Sensor kit usage image
The sensor data can be transmitted wirelessly by connecting the sensor to the The "BLE Evaluation Kit/Board". As a opposite device, a smartphone application is also available so that you can check the wirelessly transmitted data.
Place of use
Smart house
The application for smartphones and tablets is also available, so you can collect and check the sensor data in real time and quickly test it with prototypes (or mass-produced products).
Production line with IoT
Warehouse and office environmental monitoring
Care centers or nursing homes
Social infrastructure
To solve the existing problems
Problem
To build or experiment with an IoT system using wireless modules and sensors,...
- What do I need to prepare?
- How long will it take?
- What kind of effect does it have?
- A kit for PoC is difficult to utilize for commercialization.
Solution
- It can be tried out the minimum necessary preparations as all-in-one package.
- It can be replaced the sensor and try it out.
- This sensor kit use an evaluation board of a real product instead of the kit only for PoC, so it can be evaluated immediately with a configuration similar to a prototype (mass-produced product).
Firmware selection flowchart
>Overview
(If you are not good at software development.)
3 types of sensor trials
The three types of sensors included in the "Sensor Node Development Kit" can be used. BLE communication (Beacon, Connection) is supported for the data acquired by the sensors. It can be used immediately after writing the firmware to the "BLE Evaluation Kit/Board".
20 types of sensor CLI
(Command Line Interface)
20 types of specified sensors can be used
By writing the firmware to the "BLE Evaluation Kit/Board" and making simple settings from a PC, etc., it can be used immediately.
(If you are not good at software development.)
3 types of sensor trials
The three types of sensors included in the "Sensor Node Development Kit" can be used. BLE communication (Beacon, Connection) is supported for the data acquired by the sensors. It can be used immediately after writing the firmware to the "BLE Evaluation Kit/Board".