Sensor Node Development Kit

HOME　>　Product Information　>　Wireless Modules　>　Sensor Node Development Kit

TAIYO YUDEN WIRELESS ONE STOP SOLUTION

TAIYO YUDEN's 2.4GHz (802.15.1) "BLE Evaluation Kit/Board", "Sensor Node Development Kit", "3 types of firmware" and various sensors can be combined to realize a "start small" for IoT.

Sensor kit usage image

The "Sensor Node Development Kit" is a kit that includes a adapter board (Sensor Socket) for connecting sensors, a couple of sensors, and firmware for communicating sensor data wirelessly using BLE.
The sensor data can be transmitted wirelessly by connecting the sensor to the The "BLE Evaluation Kit/Board". As a opposite device, a smartphone application is also available so that you can check the wirelessly transmitted data.

Sensor Node Development Kit

Place of use

Smart house

When developing all kinds of smart house products using sensor kits, it is possible to test them easily.
The application for smartphones and tablets is also available, so you can collect and check the sensor data in real time and quickly test it with prototypes (or mass-produced products).

Production line with IoT

Obtaining the status of the production line can be tested with only minimal modification or addition to existing equipment. It is easy to deploy and test without programming and at low cost.

Warehouse and office environmental monitoring

This sensor kit uses BLE technology to remotely monitor the warehouse environment with low power consumption and save manpower to patrol the warehouse.

Care centers or nursing homes

In case of developing a solution that integrates artificial intelligence (AI), such as a fall detection device or a contactless control panel, by testing with the use of sensor kits, it can be finded out the possibility of focusing on the development of AI algorithms without the trouble of data collection.

Social infrastructure

The current sensor and the magnetic switch are supported, so it is easy to test the remote monitoring system of the solar power plant or wireless bicycle parking lock deployment.

To solve the existing problems

Problem

To build or experiment with an IoT system using wireless modules and sensors,...

What do I need to prepare?
How long will it take?
What kind of effect does it have?
A kit for PoC is difficult to utilize for commercialization.

Solution

It can be tried out the minimum necessary preparations as all-in-one package.
It can be replaced the sensor and try it out.
This sensor kit use an evaluation board of a real product instead of the kit only for PoC, so it can be evaluated immediately with a configuration similar to a prototype (mass-produced product).

Firmware selection flowchart

The "Sensor Node Development Kit" is available with three different firmware versions. Please select the firmware that best suits your requirements.

Want to verify IoT using sensors.
＞Overview

Want to try it first.
(If you are not good at software development.)

Want to try various things modifing the source code with my knowledge of software development.

Temperature, humidity and acceleration are fine.

3 types of sensor trials

The three types of sensors included in the "Sensor Node Development Kit" can be used. BLE communication (Beacon, Connection) is supported for the data acquired by the sensors. It can be used immediately after writing the firmware to the "BLE Evaluation Kit/Board".

Want to handle more sensors.

20 types of sensor CLI
(Command Line Interface)

20 types of specified sensors can be used
By writing the firmware to the "BLE Evaluation Kit/Board" and making simple settings from a PC, etc., it can be used immediately.

Want to handle sensors without restrictions.

Multi-sensor
Arduino Wrapper

It can be used any sensor that has been driver released for Arduino.
It can be used for various test by modifying the firmware.

Want to verify IoT using sensors.

＞Want to try it first.
＞Want to try various things.
＞Overview